Training Sistem Keselamatan Produksi Agenda

Training Sistem Manajemen Keselamatan Kerja Agenda

agenda training sistem keselamatan produksi agenda


The possible consequences of hazardous situations that may occur on all onshore and offshore production facilities are the same such as : fire or explosion ; land, air and water pollution ; damage to production equipment ; and injury to people or personnel. The goal of a production safety system design is to reduce the risk of the identified hazards to a reasonable level.

The main principles (“Four Principles”) for production safety system design and operation are :
1. Containing hydrocarbons
2. Minimizing the chances of ignition
3. Preventing fire escalation and equipment damage
4. Providing for personnel protection and escape


After attending this valuable and interesting training, the participants will be able to :
1. Understand and implement the principles of Production Safety System.
2. Conduct formal hazard identification and assessment for proper application of the above “Four Principles”.
3. Conduct safe and proper operation of production equipment and its maintenance as well as all production safety system.

1. Introduction to RI Government Regulations of  HSE Aspects in Oil & Gas Production Operations (On-Shore & Off-Shore)
2. Introduction to International Recognized Industry Codes, Guidelines, Recommended Practices and Standards in relation with Oil & Gas Production Safety System Design and Operations
3. Hazard Tree Analysis for Oil & Gas Production Facility
4. Oil Wells Operations Safety System both Natural Flowing Wells and Artificial Lift Wells include Surface & Sub Surface Safety Systems
5. Gas Wells Operations Safety System include Surface and Sub Surface Safety Systems
6. Oil & Gas Flow Lines Operations Safety System
7. Oil & Gas Manifolds Operations Safety System
8. Oil & Gas Separators Operations Safety System ; Flare, Vent & Drain, PSV, Rupture Disc Safety Systems
9. Free Water Knock Out (FWKO) Operations Safety System
10. Heater Treater Operations Safety System
11. Gas Scrubber/Gas Boots Operations Safety System
12. Storage Tanks, Transfer Pumps and Compressors Operations Safety Systems
13. Case Study, VCD/Film Show, Pre-Course Assessment (Pre-Test) & Post-Course Assessment (Post-Test)


Production Department personnel such as Operators/Technicians/Well Testers, Foremen and Supervisors. Process Engineers, Production Engineers, HSE Officers/Specialists and whoever are interested with ‘Production Safety System’

1. Ir. Didi Sugandi, Bc. M.
2. Ir. Eddy Bachri MK3 and
3. Ir. Arseno Prijatman MK3

Ir. Didi Sugandi Bc.M (Course Leader) and his partners: Ir. Eddy Bachri MK3 and Ir. Arseno Prijatman MK3. Didi Sugandi was graduated as Petroleum Engineer, 40 years (1970-2010) ‘hands-on’ work experience in Oil/Gas/Geothermal Exploration & Production Companies (Stanvac Pendopo South Sumatera, Huffco/Vico East Kalimantan, Karaha Bodas Company/KBC Garut West Java, Sumitomo Corp. Pangalengan West Java, JOB Pertamina-Gulf Jambi) in various departments (Production, HRD, HSE) include 1 (one) month (1983) as Flopetrol Production Well Testing Trainee in Total Indonesie (Offshore Oil/Gas Company) Handil Field East Kalimantan and 6 months (1996) as HSE Consultant at Lasmo Oil PLC Malacca Strait (Offshore Oil/Gas Company) and 7 years (2003-2010) as HSE Consultant/Auditor/Trainer of PT Surveyor Indonesia in Drilling and Completion Dept. PT Caltex/Chevron Pacific Indonesia (CPI) Sumatera Operations Area. He has also 18 years experience (1992-2010) as a Petroleum, HSE, Human Resources & Security Trainer both
In-House and Public Trainings.

Jadwal Pelatihan agendatraining Tahun 2021 :

  • 19-20 Januari 2021
  • 16-17 Februari 2021
  • 16-17 Maret 2021
  • 20-21 April 2021
  • 18-19 Mei 2021
  • 15-16 Juni 2021
  • 20-21 Juli 2021
  • 17-18 Agustus 2021
  • 21-22 September 2021
  • 19-20 Oktober 2021
  • 16-17 November 2021
  • 21-22 Desember 2021

Catatan : Jadwal dapat menyesuaikan dengan kebutuhan anda dengan catatan kuota peserta minimum 2 (dua) peserta terpenuhi. agenda pelatihan production safety system agenda

Biaya dan Lokasi Pelatihan : agenda training sistem keselamatan produksi terbaru

Lokasi : agenda training sistem manajemen keselamatan kerja terbaru

· Jakarta : Hotel Amaris Kemang, Amaris Tendean,Trinity Hotel, Ibis Budget.

· Bandung : Hotel Santika, Hay Hotel,Ibis Style, Novotel Hotel, Golden Flower Hotel, 1O1 Hotel, Grand Tjokro Hotel, Tune Hotel, Four Point by Sheraton Hotel.

· Yogyakarta : Hotel NEO+ Awana, Cordela Hotel,Ibis Style, Boutique Hotel, Cavinton Hotel, Mutiara Hotel, Dafam Malioboro Hotel, Prima Inn Hotel .

· Surabaya : Novotel Hotel, Ibis Center Hotel, HARRIS Hotel, Favehotel, Alana Hotel .

· Malang : Amaris Hotel, The 1O1 Hotel, Ibis Style Hotel, El Hotel, Whiz Prime Hotel .

· Bali : Ibis Kuta, Fontana Hotel, HARRIS Hotel & Conventions .

· Lombok : Favehotel, Novotel Lombok, D Praya Hotel .

Catatan : Biaya diatas belum termasuk akomodasi/penginapan.

agenda pelatihan sistem keselamatan produksi agenda 

Investasi Pelatihan Agenda Training : agenda training sistem manajemen keselamatan kerja agenda

1. Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

2. Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas Pelatihan Agenda Training : agenda training keselamtan kerja agenda

1. FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)

2. FREE Akomodasi Peserta ke tempat pelatihan .

3. Module / Handout

4. FREE Flashdisk .

5. Sertifikat

6. FREE Bag or bagpackers (Tas Training) .

7. Training Kit (Dokumentasi photo, Blocknote, ATK, etc)

8. 2xCoffe Break & 1 Lunch, Dinner.

9. Souvenir .

Leave a Reply

Your email address will not be published. Required fields are marked *

Tanyakan pada kami ?

Kami di sini untuk membantu Anda! Jangan ragu untuk menanyakan apapun kepada kami. Klik di bawah untuk memulai obrolan.





Hai, tanyakan pada kami ? 00.00